Sintratec vs. Sinterit SLS 3D Printers

When you are searching for a new SLS 3D printer, it only makes sense to consider all of the options available on the market.  At the moment, the two leaders in affordable SLS 3D printing are Sintratec and Sinterit.  With names this close, it is not surprising when we find customers confused between the two brands.  

SIMILARITIES

  • European Roots
    • Sintratec 3D printers are designed and manufactured in Switzerland
    • Sinterit 3D Printers are designed and manufactured in Poland

  • Focus on Selective Laser Sintering (SLS) Technology 
    • While many newcomers to the SLS market are chasing the "next big thing", both Sintratec and Sinterit have focused on SLS technology since their inception.
    • Sintratec was founded in 2014 and has won 14 prestigious awards for their technology 
    • Sinterit was also founded in 2014 and has won 9 awards for their technology
  • Affordable SLS 3D printers
    • Both companies identified a gap in the market for SLS 3d printing technology, which prior to 2014, required an investment of a $200k+ to start printing in SLS 
    • Sintratec has focused their development on serving researchers, professionals and industrial customers, with prices ranging from $6-40k.

    • Sinterit has focused their development on high level hobbyists and business looking to explore SLS, with prices ranging from $13-18k

  • US Partners
    • Sintratec is represented by 3DChimera (that's us).  3DChimera was founded by engineers for engineers and is based in Miami, FL.  We have been in business since 2013 and service customers around the USA including Apple, DuPont, Toshiba, Adidas, the US Army and many other organizations large and small.  We have been working with Sintratec since 2017.
    • Sinterit is represented by 3DHerndon (again, the names can be confusing).  They were founded in 2014 and are based in Herndon, VA.
  • Nylon and TPE printing capability
    • The Sintratec printers can print PA12 and TPE right out of the box, with may new materials in development like Carbon Fiber Nylon, Glass Fiber Nylon, and Polypropelene (PP).  In addition, the Sintratec Kit is an open material 3D printer, allowing for exotic applications.
    • The Sinterit printers can print PA12, PA11, TPE, and "Flexa" in their stock configuration.
  • Low Power Laser
    • Both the Sintratec and Sinterit printers utilize a low power laser to sinter the powder in the build chamber.
    • Traditionally, the laser is the most expensive component in an SLS system, and the cost savings from this lower power laser is how these systems can be manufactured to be more affordable that other competitors.
    • In order for this to work, the wavelength of the laser and the color of the powder must be tuned to work perfectly together - this is why the most of the materials printed on these machines use grey powder
    • The Sintratec S2 uses a 10W laser and the Sintratec Kit uses a 2.3W laser. 
    • The Sinterit Lisa printers use a 5W laser.

DIFFERENCES

While there are many similarities between the two brands, there are also some big differences which need to be considered for your unique application.

  • Build Volume
    • All SLS 3D printers have an available build volume and a usable build volume.  The usable build volume is the area where the parts are able to be printed without concern regarding warping or curling during the print process.  This volume can vary by material.
    • These are the maximum usable build volumes for the Sintratec and Sinterit SLS 3D Printers:

Printer

Max Usable Build Volume

Sintratec Kit

All: 90 x 90 x 90 (3.5 x 3.5 x 3.5in)

Sintratec S2

PA12: ⌀130 x 360mm (⌀5.1 x 14.1in)

------------------ ------------------------------------------------------

Sinterit Lisa

PA 90 x 130 x 130mm (3.5 x 5.1 x 5.1in)

TPE/Flexa: 110 x 150 x 150 (4.3 x 5.9 x 5.9in)

Sinterit Lisa Pro

PA: 90x130x230mm (3.5 x 5.1 x 9in)

TPE/TPU: 110x150x250mm (4.3 x 5.9 x 9.8in)

    • From these specs and photos of the printers above, you can see that the Sintratec S2 is a ground up redesign of the Sintratec Kit.  The Sintratec S2 is a modular system with a cylindrical build volume.  
    • The Sinterit Lisa and Lisa Pro are virtually the same printer, with the Lisa Pro having a slightly taller build volume.
  • Laser Construction & Print Speed
    • All Sintratec 3D printers use a galvo based laser system.  This allows the laser to remain in a fixed position while precision galvos direct the laser pattern.  This allows the Sintratec printers to be 4-8x faster when printing the exact same geometry as Sinterit.
    • The speed of the Sintratec printers is determined by the height of the parts in the z-direction.  The Sintratec S2 prints at up to 2.4cm/hr and the Sintratec Kit pints at up to 1.1cm/hr.
    • The Sinterit printers do not showcase their speed or quantify it is any way.  
  • Learning Opportunity @ a low cost with Sintratec Kit
    • The Sintratec Kit was the first and only kit-based SLS 3D printer available on the market. This allows the builder to learn every component in the system during the assembly process, making it perfect for educational and research environments
    • Since you will be doing the assembly, the Sintratec team passes the savings along to you, making it the least expensive SLS 3D printer on the market.
  • Modular System allows for controlled growth with the Sintratec S2
    • The Sintratec S2 is broken into 3 main modules, each of which can be purchased separately when you need to increase throughput or capacity
    • This allows you to control expenses and strategically invest in more hardware on an as needed basis.

  • Sintratec SLS 3D Printers are built for industry and research
    • The Sintratec S2 was developed to allow organizations to invest in SLS 3D printing for all applications, including short run production.  The speed of this system allows it to compete with systems that cost 200-300% more than the S2, with equivalent or better quality on the final parts.
    • The Sintratec Kit is a completely open material system, allowing researchers to develop and test new powders easily.  In addition, the Sintratec Kit has fully open parameters allowing you to easily tweak things like speed, laser pattern density, perimeters and more.
  • 3DChimera Support & Training is best in class
    • At 3DChimera we pride ourselves in our hand-on expertise with all of the equipment that we sell
    • All of our trainers and support staff are degreed engineers (often with more than a few degrees) and with years of experience in manufacturing and product development.  
    • If you have questions our team will be able to get you answers.  Our team has been trusted by professionals from Fortune 100 companies to internationally recognized research institutions. 
    • The 3DChimera team was recognized as one of the Top 10 3D Printing Consulting Companies in the USA from Manufacturing Technology Insights for 2 years in a row (2019 & 2020)
    • The 3DChimera team was selected as a competitor in the 2020 Advanced Manufacturing Olympics (AMO) hosted by the Rapid Sustainment Office (RSO) of the US Air Force in two different categories.  3DChimera is the only team from Florida and the only 3D printer reseller included in the 64 competitors.

    

 

 


Need some more guidance? 

No worries, 3DChimera is here to help.  Don't hesitate to reach out to alex@3dchimera.com with any specific questions for your application. 

 


Leave a comment

Please note, comments must be approved before they are published